Applications

Your schedule depends on reliability...

AMETEK Technical & Industrial Products offers one of the largest selections of motors and blowers. Our products cover the full range, from small Brushless DC radial blowers all the way up to large industrial regenerative blowers. You can count on AMETEK Technical & Industrial Products to meet your air handling needs. Applications for printing machines, copiers, collators, and book binding machines include but not limited to products for:

Paper Handling - Pick-up, Feed, Transport, Separate
Cooling
Turning Bars
Tape Drives

ATM/Banking Equipment
Toner Control
Ink Drying
Laser Imaging
Cleaning Systems

A Refreshing Choice...

For over 50 years, AMETEK Technical & Industrial Products has designed and manufactured regenerative blowers for a wide variety of processing air moving applications, including:

Clean room air circulation
Oxygen generators
Vent header off-gassing
Sterilization gas (ETO) recovery

Bottle & can drying
Label drying
Batter, salt, spice, & flour blow-off
Land-fill gas

There are a number of AMETEK Technical & Industrial Products designed to suite the unique sterility requirements of processing applications, especially:

CP (Chemical Processing Regenerative) series - featuring standard DR designs and EN explosion-proof designs with Chem-Tough™ and Food-Tough™ corrosion resistant treatments, chemical duty motors, stainless steel hardware, and nickel plated flanges and muffler retainers.

Nasty Gas Chemical Processing series - featuring Chem-Tough™ and Food-Tough™corrosion resistant treatments, carbon steel and stainless steel shafted motors, stainless steel hardware, nickel plated flanges and muffler retainers, and low leakage rates (<0.06cc/min).

Efficient, safe, effective...

AMETEK Technical & Industrial Products offers one of the largest selections of combustion blowers, and natural gas booster pumps. Our products cover the full range, from small Brushless DC radial blowers all the way up to large industrial regenerative blowers. You can count on AMETEK Technical & Industrial Products to meet your combustion blower needs. Applications for these systems include but not limited to residential and commercial furnaces and boilers, gas-fired food service equipment, water heaters, kilns and fuel cells.

Nautilair Variable Speed blowers, the latest addition to our combustion blower offering, provide appliance and combustion engineers a key component to optimize their gas-fired systems. With the emphasis on greater combustion efficiency and need for lower NOx and CO emissions, the use of variable speed premix blowers offers design flexibility.

Sealing Options on our Regenerative Blowers allow our blowers to handle the vast majority of hazardous duty applications and flammable gases. We offer two types of motor shaft seals, and an option for nitrogen purge. For closed systems we offer a line of magnetically coupled blowers.

Because our entire world depends on it...

For over 50 years, AMETEK Technical & Industrial Products has designed and manufactured regenerative blowers for a wide variety of environmental air and vapor moving applications, including:

Soil vapor extraction
Gasoline vapor recovery
Groundwater sparging
Wastewater treatment aeration

Lagoon gas recovery
Landfill off-gas evacuation and collection
Radon gas collection

There are a number of AMETEK Technical & Industrial Products designs suited to environmental applications, especially:

EN (Environmental Regenerative) series - featuring explosion-proof construction, heavy duty cast aluminum manifolds; spark resistant housings, covers, impellers, muffler towers, and manifolds; Teflon lip seal in a stainless steel case; and explosion-proof motors.

EN_RD (Remote Drive Regenerative) series - featuring the same explosion-proof construction as the EN series with the added benefit of motorless operation.

CP (Chemical Processing Regenerative) series- featuring EN explosion-proof designs with Chem-Toughâ„¢ corrosion resistant treatments, chemical duty motors, stainless steel hardware, and nickel plated flanges and muffler retainers.

Where reliable backup power matters...

AMETEK Technical & Industrial Products offers one of the largest selections of blowers, pumps and fans designed specifically for the fuel cell industry. We offer a full range of products for use in the following systems / applications:

Cathode air
Reformer
Ventilation
Natural gas boost
Biogas recovery & boost
De-ionized water circulation
Electronic cooling
KOH pump

As fresh as the air...

For over 50 years, AMETEK Technical & Industrial Products has designed and manufactured regenerative blowers for a wide variety of industrial air moving applications, including:

PARP respiration
Electroplating equipment
Packaging equipment
Bag filling equipment
Cutting tables
Vacuum manipulators
Printing presses

Textile equipment
Weld smoke removal
Air slides
Blast cleaning
Dilute phase conveying
Pneumatic tubes

There are a number of AMETEK Technical & Industrial Products designs suited to industrial applications, especially:

DR(Domestic Regenerative) series - featuring cast aluminum housings, impellers, and covers; cast iron flanges; TEFC or ODP motors; and permanently sealed motor bearings for a lifetime of 20,000-25,000 hours.

DR_RD (Remote Drive Regenerative) series - featuring RD series construction, with the added benefit of motorless operation.

NC (Nautilair^TM Centraxial) series - featuring fiberglass housings with polysulfate or aluminum impellers; models available for high flow/low pressure ventilation or cooling.

MF (Multiflow^TM/ Windjammer^TM Variable Flow) series - featuring compact construction, built-in speed control, aluminum impellers and shroud, permanently sealed ball bearings for a lifetime of 20,000 hours; models available for AC or DC input.

When you need a breakthrough...

For over 50 years, AMETEK Technical & Industrial Products has designed and manufactured regenerative blowers for a wide variety of instrumentation air moving applications, including:

Glove box pressurizing
Incubator air circulation
Weather measurement sampling
Engine/motor cooling
Film development system cooling
Lamp bank cooling
Small enclosure cooling

There are a number of AMETEK Technical & Industrial Products designed to suite instrumentation applications, especially:

SE (Minispiral^TM Regenerative) series - featuring palm-sized AC and DC models; glass filled, modeled phenolic cases and impellers; bearing lifetimes of 30,000 hours; small size and lightweight construction; quiet to NC-47 specifications.

SL (Spiral^TM Regenerative) series- featuring rugged die cast aluminum housings, endbells, and impellers; sheet metal aluminum covers; extremely compact envelope dimensions; encased mufflers; low amp draw and high efficiency; and permanently sealed bearings for a lifetime of 20,000-25,000 hours. Hermetically sealed models are available for glove box use.

Protecting everything that matters...

Air Bed
Respiration
Air Vest
Dental Evacuation
Medical Drills
Heart Pumps
Laboratory Equipment

AMETEK Technical & Industrial Products variable speed, brushless DC blower, motor and electronic controller products are increasingly becoming the standard for many medical device OEM applications requiring both various levels of performance and customized design requirements. Through a cost competitive, reliable, and complete motion and/or air movement system, AMETEK Technical & Industrial Products has a wide range of products to meet your design needs for the healthcare industry.

Now you can breathe easier...

AMETEK Technical & Industrial Products offers one of the largest selections of motors and controllers designed specifically for Pump and Compressor applications.

Motors ranging in size from 0.33” to 6”
Analog and Digital Controllers up to 20 Amps

Making more than clothing...

AMETEK Technical & Industrial Products provides specialty motor and blower products for Textile applications, including:

Yarn aspiration and string up for fabric texturizing
Wet looms for shuttle transport
Air tables for garment cutting hold-down
Thread Tensioning

There are a number of AMETEK Technical & Industrial Products designs suited to the unique sterility requirements of processing applications, especially:

CP (Chemical Processing Regenerative) series - featuring standard DR designs and EN explosion-proof designs with Chem-Tough™ corrosion resistant treatments, chemical duty motors, stainless steel hardware, and nickel plated flanges and muffler retainers.

Nasty Gas Chemical Processing series - featuring Chem-Tough™ corrosion resistant treatments, carbon steel and stainless steel shafted motors, stainless steel hardware, nickel plated flanges and muffler retainers, and low leakage rates (<5cc/min).

Related Information:
Market Guide: Textile Blowers

Getting you there ... reliably

AMETEK Technical & Industrial Products offers one of the largest selections of blowers, fans,motors and pumps for heavy duty transportation applications and other commercial vehicles.

Bus

Evaporator Blowers/Condenser Fans
Underfloor/Underseat Blowers
Driver’s Ventilation Blowers
Heater/Defroster Blowers
Stepwell Blowers
Radiator Cooling Fans
Water Circulating Pumps

Rail

Power Inverters
Evaporator Blowers/Condenser Fans
Locomotive Cab Blowers
Diesel Fuel Pumps

Other applications of AMETEK TIP products include:

Gaming
Fume evacuation
Air sampling
Spa
Electroplating
Robotics
Packaging equipment

Material handling
Aquaculture
Banking equipment
Food processing
UV lamp cooling
Electronics cooling

Related Information: